The AMD-SW1500 winder is a full production winder. Product diameter ranges from 500-1500 mm and the length between the centers is 20m.

 

This information is indicative and may be subject to change at any time without further prior notice.

 

 

Description

 

 


amd sw 1500 2amd sw 1500 2

 

  • Full production winder
  • Product diameter range 500-1500 mm
  • Length between the centers 2 m
  • Typical product applications: tubes & piping, medium sized tanks, large drive shafts, utility poles, sleeves, antenna’s, masts, etc.
  • This winder can be used in combination with a static or dynamic resin tray on the carriage a (tensioned) creel and (offline) winding software. In addition, we can design and build your mandrels and other possible tooling.
  • Prepared for automation
  • Can be integrated in an automated line